|
Post by blinks2001 on Mar 15, 2014 18:35:01 GMT -5
Ok, I have spent the last two days trolling the net and YouTube trying to find an answer, so this is my last resort.
ive tried to install the so called easy to fit conversion kit, but there is nowhere for the props to attach to the front wheels.
do I need something extra?
please help
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 16, 2015 7:16:16 GMT -5
I know... the easy to fit 4wd conversion kit... so easy to install that it doesn't even come with any instructions!
I set out on this mission... took about 3 hours to complete, but now having done it once would probably take 1 hour max.
I battled for a while with your query too... take the front wheels off, look in the outside end of the hub and you can see a tiny grub screw deep inside. Take this out (but don't loose it you need it in reassembly).
You will find a shaft through the front axel probably falls out or needs a lil tap. This will then allow you to remove the hub and replace it with the one that comes in the kit.
Simply slide out the old, slide in the new, push through the lil shaft and insert and tighten the grub screw.
Easy (once you know how)
Hope this answers your query
|
|
|
Post by Racoon on Oct 4, 2018 4:32:31 GMT -5
Where do I buy parts from?? I have been using Aliexpress but have found alot of the parts I am after are no longer around.. I am chasing a 018003 Gear box set atm.. can anyone point me in the right direction.. BTW I'm from Australia Thanks
|
|