|
Post by fsmt4wd on Jan 27, 2010 10:29:57 GMT -5
85-95 euro, not sure yet...
|
|
|
Post by fsmt4wd on Feb 14, 2010 4:19:40 GMT -5
15kg (30pounds) of weight on top of a FG MT fiberglass/kevlar body next will be the hammer test ;D
|
|
tt-r
New Member
Monkey see, monkey doo....
Posts: 25
|
Post by tt-r on Feb 14, 2010 6:40:54 GMT -5
15 kilos of "weight" Are you sure that's not really a small human being? ;D You dont happen to make some rally bodys as well? I would really be interested in a Subaru og a Mitsubishi body for my FS
|
|
|
Post by fsmt4wd on Feb 14, 2010 10:49:32 GMT -5
|
|
tt-r
New Member
Monkey see, monkey doo....
Posts: 25
|
Post by tt-r on Feb 14, 2010 17:00:39 GMT -5
Awesome. That video rocks, as do all Ken Block movies. I really am interested in a body like that. May i ask if its long into the future when they will be available? If you decide to replicate the jump be sure to film it
|
|
|
Post by fsmt4wd on Feb 15, 2010 1:44:06 GMT -5
it will be done this summer! and the jump too
|
|
tt-r
New Member
Monkey see, monkey doo....
Posts: 25
|
Post by tt-r on Feb 16, 2010 16:08:30 GMT -5
Sweet ;D Lookin forward to it.
|
|
|
Post by fsmt4wd on Mar 12, 2010 16:50:01 GMT -5
|
|
|
Post by theydontwantmusic on Mar 12, 2010 17:41:18 GMT -5
15kg (30pounds) of weight on top of a FG MT fiberglass/kevlar body next will be the hammer test ;D well it would have to support that much weight, seeing thats almost how much the whole truck weighs! and you wouldn't want the shell cracking just from a simple roll over I cracked my stock hummer shell, when I rolled it badly on a hard surface, after attempting to drive it with a broken front lower ball joint it didn't work.. haha
|
|
|
Post by 338lapua on Aug 12, 2010 17:36:09 GMT -5
ok I am in for one sign me up ;D ;D ;D
|
|
|
Post by 338lapua on Aug 15, 2010 5:25:04 GMT -5
I have a few questions 1-which pipe clears the best on that Baja1000 body 2- now I need to make a new bumper
oh can I get a hell yeah for fshopups you guys are making some bad ass stuff ;D ;D ;D
Thanks Rodger
|
|
|
Post by fsmt4wd on Aug 15, 2010 7:49:25 GMT -5
hi rodger
the tuned pipe(jetpro clone)fits with the baja body, we have a new version black one(heat proof paint) in stock, lemme me know if you need it and i can ship it with the body, will look real good black with black exhaust.
thanks we do our best for this community
|
|
|
Post by wolfen on Aug 15, 2010 8:25:03 GMT -5
hell ya for fshopups lol
|
|
|
Post by 338lapua on Aug 17, 2010 15:34:42 GMT -5
I have looking around for some Ideas for the bumper that will work and look good with this body
how riggid should I make it ? plus been thinking about extending it down under the chassy for some skid action lol
|
|
|
Post by fsmt4wd on Aug 18, 2010 2:50:32 GMT -5
a bumper made from a cutting board would work good, you can extend it further than the chassis and if you make it wide enough it will protect the front wheels too.
|
|