Post by rallyfinnen on Mar 27, 2009 11:54:23 GMT -5
I was driving the buggy yesterday, and must have hit something badly enough to bend the camber adjustment screw.
No major crashes, so i think it's too weak..
Also noticed the other one was a little bent, so they seem a bit weak.
Can't find the old parts now, so no pics of that, but this is what i did:
Camber can still be adjusted by loosening the nut with a 13mm wrench,
rotating the bolt and locking it with the nut again.
Will try it out and see how it holds up.
By the way, the spacers on the pivot shaft for the upper a-arm is modified too.
I cut it to a c-shape and put a small screw in it so i can grab the screw, pull it off and move it to the other side to increase caster.
No major crashes, so i think it's too weak..
Also noticed the other one was a little bent, so they seem a bit weak.
Can't find the old parts now, so no pics of that, but this is what i did:
Camber can still be adjusted by loosening the nut with a 13mm wrench,
rotating the bolt and locking it with the nut again.
Will try it out and see how it holds up.
By the way, the spacers on the pivot shaft for the upper a-arm is modified too.
I cut it to a c-shape and put a small screw in it so i can grab the screw, pull it off and move it to the other side to increase caster.