|
Post by wolfen on Dec 10, 2009 12:00:29 GMT -5
i'm wondering if anyone else has melted their plastic gear carrier right where the shaft of the clutch bell shaft goes where the bearing fitson the inside
|
|
|
Post by fsbaja on Dec 10, 2009 13:16:12 GMT -5
Haven't had it , but i know (from MCD's) it's caused by running to tall gearing or bearings that go bad.
A tall gearing will cause the clutch to slip en generate heat which is transfered to the plate by/thru the bearings softening the plastic and causing the problem.
A bad bearing will cause the same , if it get's blocked somehow (dirt/rust/etc) the compleet bearing (incl. outershell) will start rotating which will also heat and soften up the plastic.
A alloy gearplate is the best solution to the problem.
|
|
|
Post by fsmt4wd on Dec 10, 2009 13:41:58 GMT -5
nope never happened but have heard of it, as fsbaja says can be caused by a few things.. i have my plastic one thats never been used that you can have if you want...
|
|
|
Post by wolfen on Dec 10, 2009 14:42:55 GMT -5
how much to ship it to k7a 5a9 ontario,canada
thank you very much
|
|
|
Post by fsmt4wd on Dec 10, 2009 15:03:18 GMT -5
send me your address and will post tomorrow, will let you know the cost once i shipped it... doubt its much as it will fit in a bubble envelope
|
|
|
Post by wolfen on Dec 10, 2009 15:13:14 GMT -5
e-72 thurber st. smiths falls on. canada k7a 5a9
here ya go thank you very much
|
|
|
Post by wolfen on Dec 10, 2009 15:16:09 GMT -5
hey bud i cant go over 15$ cnd
|
|
|
Post by fsmt4wd on Dec 10, 2009 16:49:41 GMT -5
no worries will get it out tomorrow..like i said i doubt its much as its in a bubble CD envelope.. consider yourself sponsored lolololol
|
|
|
Post by fsmt4wd on Dec 11, 2009 4:31:25 GMT -5
sent it out bud..should get it in a few days..addressed it too W.Olfen
|
|
|
Post by wolfen on Dec 11, 2009 8:06:38 GMT -5
lol im an idiot my name is reginald palmer i feel like such an idiot now lol lol lol so how much lol lol
|
|
|
Post by fsmt4wd on Dec 11, 2009 9:20:21 GMT -5
forget about it, it was sent in a envelope so does not have to be signed for.. so it dont matter what name it's in.
|
|
|
Post by wolfen on Dec 11, 2009 10:53:38 GMT -5
ok kewl thank you very very much for your help i really appreciated it
REG
|
|
|
Post by wolfen on Dec 18, 2009 9:15:40 GMT -5
just a heads up FSMT4WD i stuill havent got it yet
|
|
|
Post by fsmt4wd on Dec 18, 2009 13:02:38 GMT -5
yea i suppose its that time of year, did not send it with tracking so no way of knowing whats the status..hope its there before xmas..
|
|
|
Post by wolfen on Dec 18, 2009 16:02:27 GMT -5
ya i'll get it sometime next week ill tell you when it comes in
|
|