|
Post by theydontwantmusic on Dec 28, 2009 2:18:37 GMT -5
oops.
hadn't planned on jumping the truck, came in too fast, got airborne, landed on one wheel, and the balljoint snapped straight out.
ah, is there a hop up for this? haha
problem is, that to replace the ball joint socket you have to purchase the whole wishbone!!
I don't need that!!
|
|
|
Post by fsmt4wd on Dec 28, 2009 3:13:48 GMT -5
use tie wraps to pull together stops the lower ball joints from pulling out, alloy hold up better but at a cost..
|
|
|
Post by theydontwantmusic on Dec 28, 2009 4:46:28 GMT -5
i swapped the ball joint socket from the rear, to the front.. but I still need something on the rear. however, it doesn't actually need to be a ball joint on the rear... I might just make up some brackets
|
|
|
Post by rallyfinnen on Dec 29, 2009 3:48:28 GMT -5
The bigger ball joints are the same as FG etc, can be found at most shops selling LS parts! you can also use washers on the bolts to prevent the joints from popping off.
|
|
|
Post by theydontwantmusic on Jan 3, 2010 1:00:45 GMT -5
|
|
|
Post by fsmt4wd on Jan 3, 2010 9:40:41 GMT -5
yup those should work
|
|