|
Post by fsmt4wd on Jan 12, 2010 6:15:06 GMT -5
|
|
|
Post by wolfen on Jan 12, 2010 11:55:33 GMT -5
looking good bud keep up the good work
|
|
|
Post by fsmt4wd on Jan 12, 2010 12:44:28 GMT -5
thanks man!
|
|
|
Post by fsmt4wd on Jan 21, 2010 11:43:39 GMT -5
1/4th scale shock DIY now open!
|
|
|
Post by 338lapua on Mar 27, 2011 1:52:29 GMT -5
Is this conversion still possible?? just reading thru some older post an this has my wheels turning. ;D lol
|
|
|
Post by fsmt4wd on Mar 27, 2011 2:56:40 GMT -5
yes and no.. the parts are hard to get as the factory are full of BS... was hoping CEN would come out with something the same.
we are still looking at other options, we are going to start to focus on the FS/CEN hopups again, so this year there should be some cool things coming out from our camp.
|
|
|
Post by 338lapua on Mar 27, 2011 11:07:19 GMT -5
sounds good keep us up to date . and thanks for the FSHOPUPS support .
An this body, gears, plate,pipe are top notch no-problems plus I have wolfens truck headed to me if he gets a big enuff box. ;D will post up the new addition to the fleet soon.
|
|
|
Post by fsmt4wd on Mar 28, 2011 2:19:52 GMT -5
what??? see he left the club without telling us?
|
|
|
Post by 338lapua on Mar 28, 2011 8:23:28 GMT -5
I think it was pear pressure ,everyone around he plays with has bajas kinda thing. I tell him too stop over an begg forgivness lol . he will miss it im sure. but it will have a good home . I try to get all the old dogs an bring them home so they can live out there years playing in my field. of course it's a battle out there some days. ;D
|
|
|
Post by ginogino on Mar 28, 2011 21:24:29 GMT -5
Yeah in his area (Ottawa) they all have bajas, hope I am not stepping on anyones toes. A few of them come down south 5 hour drive to race at the 1/5th track. But I believe they got the city to build a track for them, but they all run 2wd bajas. Down here we have a euro class/4wd class with some fgs, mcds, and elcons. This year I will be running the CEN with them as well as my 5t in the baja class.
|
|
|
Post by 338lapua on Mar 28, 2011 21:41:31 GMT -5
wish I had a track close enuff to race 5th scale .but I am between 2 that are 2hours away 1 north,1 south .maybe I should build 1 in the middle.lol
Whats your location gino?
|
|
|
Post by ginogino on Mar 29, 2011 22:27:06 GMT -5
I am in Stoney Creek/Hamilton about 40 min from Buffalo Ny and an hour from Toronto Canada.
Hey David and Lee after looking at the 1/4 scale diff it has similar internal to the hpi diff. Do you think there is anyway of making a helical gear to mesh with the drive gear using that type of diff. The gear mounts in the middle on the baja diff but if it could be mounted to one side using sleeves I think it could hit in the 1/5 diff box. I just threw mine back together next time I pull it apart will check the size of the existing diff case with one of my spare baja diffs. Or if someone can post the distance from the edge of where the bearings sit will check the distance with my spare.
I hope that made sense. It's a cheaper alternative then buying an mcd diff for a completely sealed diff. Then again they all leak eventually, lol.
|
|
|
Post by fsmt4wd on Mar 30, 2011 9:23:11 GMT -5
tried that, lots of work needed to make it fit, soon a cheaper alternative LSD will be available
|
|
|
Post by ginogino on Mar 30, 2011 16:24:35 GMT -5
Sweet!!!!!
|
|
|
Post by 338lapua on Mar 30, 2011 19:21:11 GMT -5
uh oh the cats out of the bag ;D ;D
|
|