fisch
New Member
Posts: 2
|
Post by fisch on Feb 7, 2009 9:25:30 GMT -5
I just got my FS truck yesterday and I'm starting my upgrades. I was wondering if I can use the stock GWS servo and a Hitec 805BB together? Is there any special way to hook up duel servos. I was reading on a site that with the high current drain of the servos, it could damage the receiver. (i'm using a 2.4GHz radio) Any other tips you guys could give me would be a great help! This is my 1st 1/5 scale truck, I've had many 10 and 8 scale, but needed something bigger! Thanks for any help you can give me...
|
|
sickboy
Full Member
hey hook me up with another fs www.fshopups.com
Posts: 187
|
Post by sickboy on Feb 7, 2009 10:23:06 GMT -5
hi there welcome here well the first thing i would say is bin the servos that came with the car and get your self some good servos diggy is the way to go analog is a no go and if you are using a 2.4ghz then i would strongly advise the diggy servos more precision much quicker then analog oh and don't forget to strip the car down to the bear essentials and rebuild the car using a good loctite and this way you know that the car is set up the right way and no screws will come loose if you have problems setting the car up then you can use this link to set the car up how it should be www.mcdracing.com/media.htmthen you need Spare Parts Catalogue 2007 click on and then youcan see all the info you need
|
|
|
Post by 338lapua on Aug 9, 2011 17:45:55 GMT -5
I havent heard on those 805's but most end up using 5755mg .....
|
|