|
Post by wolfen on Jan 4, 2011 9:59:06 GMT -5
whats the easiest way to set up dual steering servos
|
|
pipeous
Junior Member
RC Junkie
Posts: 51
|
Post by pipeous on Jan 4, 2011 12:56:59 GMT -5
Get the lads to sell you some Nutech steering rod ends. I ended up changing both over, they work well. or just buy a second steering rod... First mount the servos in and use a Y cable to channel one. Turn on the radio and such and get the servos centered (adjust trims and sub trims to zero) Align servo horns. you can see I put arrows on the horns. servo horns mount differently at each end. try one, then the other until you find the side that gives you 90 degrees, alternatively, using the round servo horns and drilling a hole exactly where you need it works good too (I used round ones with zero holes doing helis to get them exact)
|
|
|
Post by wolfen on Jan 4, 2011 16:01:18 GMT -5
thanx pipeous i got it figured out i havent ran it yet but wow what a difference
|
|