|
Post by wolfen on Jan 9, 2011 17:16:15 GMT -5
i have 23cc race ported motor with a jetpro pipe & the gearing i have is for the mt my prob is i find that i get to peak rpms too quick would changing from hostile mxt's to his mx's change anything the mx's are a little shorter then the mxt's would i need to change the gears back to stock
thanx for any info
REG
|
|
|
Post by wolfen on Jan 10, 2011 9:24:47 GMT -5
what would happen if i switched the 24T & 25T gears im going to try my hand at snow dragging on the 15th and i need to be able to go 250' right now with the tire change i think i go about 100' and then im at my peak rpm thats what it sounds like
|
|
|
Post by fsmt4wd on Jan 10, 2011 14:02:15 GMT -5
the gearing that you want is 30 33 23 26
|
|
|
Post by wolfen on Jan 10, 2011 14:39:54 GMT -5
i have the 30 & 33 i only have the 24 & 25 to go with that so are you telling me im screwed lol
|
|
|
Post by wolfen on Jan 10, 2011 15:20:14 GMT -5
next spring im going to do a engine rebuild to a 26cc what gears would work better
|
|
|
Post by fsmt4wd on Jan 11, 2011 2:25:11 GMT -5
no 30 33 would change the ratio already so you are not screwed yet
|
|
|
Post by wolfen on Jan 11, 2011 8:44:33 GMT -5
so does that mean i could run 30-33-24-25 what would happen if i ran 30-33-25-24 i'm just trying to understand this gearing stuff
|
|
|
Post by fsmt4wd on Jan 11, 2011 13:47:38 GMT -5
so does that mean i could run 30-33-24-25 what would happen if i ran 30-33-25-24 i'm just trying to understand this gearing stuff yes you can run 30 33 24 25 if you ran it 30 33 25 24 the car would blow up so dont do it lolollol never tried 25 24 so try it and let us know.. ;D
|
|
|
Post by wolfen on Jan 11, 2011 16:05:37 GMT -5
will running those gears get me 250" i'll try and run 30-33-25-24 thanx for your help
|
|
|
Post by wolfen on Jan 11, 2011 16:07:42 GMT -5
man im kinda hoping that this company demonrc converts his belt drive system for the FS he's making it for the redcat & mcd for about $225usd sounds good
|
|
|
Post by fsmt4wd on Jan 11, 2011 17:02:04 GMT -5
225 sounds expensive for what it is... and the benefits you get out of it, sure if you a onroad racer then yea i can understand,
i just dont see it as something that these cars require. but everyone to their own eh
|
|
|
Post by wolfen on Jan 11, 2011 19:16:12 GMT -5
its cheaper than rcforce theres is really nice though because it comes with a gear cover made out of aluminum but theirs is expensive i was looking into getting the metal gears 23-26 from you with the gear carrierand a steering servo linkage but i need to wait till i do my taxes to see how much my lovely wife will give me lol lol
|
|
|
Post by fsmt4wd on Jan 12, 2011 3:44:46 GMT -5
just be real nice to her ;D
|
|
|
Post by wolfen on Jan 12, 2011 9:13:34 GMT -5
im always nice to her i have her driving me 2hrs on saturday for the drag race lol
|
|
|
Post by wolfen on Jan 14, 2011 14:09:35 GMT -5
man that sucked i tried 30-33-24-25 and its worst then 24-39-24-25 at least with the mt gears i get that sound like its changing gears if i get the 23-26 gears can i run them with the 24 39 gears so i guess im going back to the mt gears i might try 24-39-25-24
|
|